What started as a passion for design and a curiosity around what was possible evolved into something I couldn't keep to myself.
Every bag in my collection is designed from scratch and 3D printed: a process that lets me build structures, textures, and details that simply aren't possible any other way. This is design and engineering in equal measure, considered down to the smallest detail.
Every piece is where mechanical, chemical, and materials engineering meet art. Precision you can hold, and a beauty that's rare by design.
The same pieces you already love, just a little smaller. Carry a mini on its own for the days you only need a card, a key, and a lip balm. Or pair one with its full-size twin for a matching mini-and-me set: one for you, one for your little one.
I've spent over a decade as a design engineer in the automotive industry — a world built on quality, structure, and innovation. And I've always believed that none of that has to be without a soul.
Peach & Poppy House was born from a simple conviction: that engineering and artistry should belong together. That something can be technically extraordinary and unapologetically beautiful. That art can hold both delicacy and strength.
Every bag I design is a small act of that belief. Sculpted digitally, printed with precision, and finished with care. Nerdy things, made beautiful. Because they always could be.
Outside of Peach & Poppy House, I'm soaking up every moment with my family in Michigan — including my twin daughters, who remind me every day why it matters to challenge the norm.
10+
Years in design engineering
3D
Every piece, 3d printed
∞
Nerdy things, made beautiful
"Technically Extraordinary and Unapologetically Beautiful."
Thank you for reaching out! Your message is on its way — I’ll be in touch soon. 🌸
Your Selection
Cart
One moment…
The Making
Process
Coming soon — a closer look at how each piece is designed and 3D printed by hand.
Shop
The Collection
Every piece, organized by collection. Each one is made to order and printed by hand, just for you.
Silky Rose
View by color
Peach & Poppy House · The Debut Collection
The Radial
$140
The Radial is not your typical bag. Designed from scratch and 3D printed in silk PLA, it's a structured, hard-shell round shoulder bag. The silk gives it a soft sheen, a subdued glitter that shifts as you turn it in the light. The front face features an original petal pattern with quilted texture, radiating outward. The remaining exterior carries a subtle texture, thoughtfully designed to resist surface scratching. Inside, a soft felt lining holds your essentials securely. The lid opens with ease and closes at a dainty magnetic floral closure.
Product details
Measurements
Diameter: 7.1" (18 cm) Width: 3.3" (8.5 cm)
Materials
Silk PLA hard shell Lining: soft felt Gold hardware
Strap
Pearl strap with gold clasps — 39.4" (100 cm) Hangs at 23.2–23.6" (59–60 cm)
Features
Magnetic floral closure Radiating petal face with quilted texture Textured shell, designed to resist surface scratching 3D printed and made to order
Colors
Silky Rose, Silky Blue, Silky Bronze
Made to Order
Each piece is made to order, printed just for you. Please allow 2–3 weeks for production before your piece is dispatched.
The Radial is finished with a pearl strap and gold clasps, 100cm (39.4 in) for an easy mid-length shoulder carry.
The Radial is crafted from silk PLA — a plant-based material derived from renewable resources such as corn starch and sugarcane, rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics and is biodegradable under industrial composting conditions. Silk PLA is also what gives the shell its sheen, a subdued glitter that comes and goes as the bag moves.
For flexible components across my collection I also use TPU, chosen for its exceptional durability and resistance to wear. A piece that lasts longer is a piece reprinted less often, and longevity is its own quiet form of sustainability.
Care Instructions
Gently wipe with a soft, dry cloth as needed. Store in a cool, dry place, away from prolonged moisture and direct sunlight.
Because PLA is sensitive to sustained high heat, avoid leaving The Radial in a hot car or in direct sun for extended periods. Handle it as you would any fine hard-shell accessory: with intention and care.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your bag is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense for the piece.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
The Radial is a structured and hard-shell piece. It does not flex, compress, or overstuff like a fabric bag, and it may produce a little more sound when set down or handled. This is a natural quality of its rigid construction.
As each bag is 3D printed and made to order, subtle variations in layer texture, finish, or color are part of the process. These are not flaws — they are the quiet signatures of an object built layer by layer, and part of what makes your Radial entirely your own.
Silky Blue
View by color
Peach & Poppy House · The Debut Collection
The Lattice
$140
The Lattice began as a mathematical problem and became something far more beautiful. At the heart of this design is an engineering breakthrough: a living hinge, designed from scratch and woven from a precise geometric lattice pattern, that allows rigid PLA to flex and move with intention. It's the detail that sets The Lattice apart — engineering you can wear. The lid sweeps open and closes over a magnetic clasp hidden by my Peach and Poppy House logo. The inner base is felted for protection and the purse is elevated on four gold feet.
Silk PLA or plain PLA Wall thickness: 0.12" (3 mm) Lining: soft felt at the base Gold hardware
Strap
Pearl strap with gold clasps — 39.4" (100 cm)
Features
Mathematical living hinge, engineered to flex within a rigid material Hidden magnetic clasp behind the logo Four gold feet 3D printed and made to order
Colors
Silky Pink, Silky Blue, Silky Bronze, Matte Sage
The Mini & Me Set
Add The Lattice Mini and take $15 off. $240 for the set, normally $255.
The Lattice is crafted from silk PLA/plain PLA — a plant-based material derived from renewable resources such as corn starch and sugarcane, rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics and is biodegradable under industrial composting conditions. In silk, it also carries a gentle sheen, a subdued glitter that surfaces as the light moves across the lattice.
For flexible components across my collection I also use TPU, chosen for its exceptional durability and resistance to wear. A piece that lasts longer is a piece reprinted less often, and longevity is its own quiet form of sustainability.
Care Instructions
Gently wipe with a soft, dry cloth as needed. Store in a cool, dry place, away from prolonged moisture and direct sunlight.
Treat the living hinge gently. Let the lid open and close naturally rather than forcing or over-flexing it. Because PLA is sensitive to sustained high heat, avoid leaving The Lattice in a hot car or in direct sun for extended periods.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your bag is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense for the piece.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
The Lattice is a hard-shell structured bag — it does not flex or compress like a fabric bag, and it may produce a little more sound when handled. The living hinge is a design feature of the lid only, intended for natural opening and closing.
As each bag is 3D printed and made to order, subtle variations in layer texture, finish, or color are part of the process. These are not flaws — they are the quiet signatures of an object built layer by layer, and part of what makes your Lattice entirely your own.
The Brézier began as a thick curtain drawn over some strong architectural presence — a form you sense but never quite see. It lets the bag read as elegance and strength at once. I built it from control points that shift splines in a directional flow, so the surface holds smooth, large radii at the base before resolving into sharp inverted points at the top — which is a brézier, by definition.
Silk PLA Lining: soft felt at the base Gold hardware
Strap
Pearl strap with gold clasps — 15.7" (40 cm) Top-handle carry
Features
Open top — a closure would fight the drape Architectural Brézier curve in profile Embossed logo on the front face Four gold feet 3D printed and made to order
Colors
Matte Sage, Silky Blue
The Mini & Me Set
Add The Brézier Mini and take $15 off. $190 for the set, normally $205.
The Brézier is crafted from plain PLA or silk PLA — a plant-based material derived from renewable resources such as corn starch and sugarcane, rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics and is biodegradable under industrial composting conditions. Printed in silk, the curve picks up a soft sheen and a subdued glitter along its length.
For flexible components across my collection I also use TPU, chosen for its exceptional durability and resistance to wear. A piece that lasts longer is a piece reprinted less often, and longevity is its own quiet form of sustainability.
Care Instructions
Gently wipe with a soft, dry cloth as needed. Store in a cool, dry place, away from prolonged moisture and direct sunlight.
Because PLA is sensitive to sustained high heat, avoid leaving The Brézier in a hot car or in direct sun for extended periods. Handle it as you would any fine hard-shell accessory: with intention and care.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your bag is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense for the piece.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
The Brézier is a structured and hard-shell piece. It does not flex, compress, or overstuff like a fabric bag, and it may produce a little more sound when set down or handled. This is a natural quality of its rigid construction.
As each bag is 3D printed and made to order, subtle variations in layer texture, finish, or color are part of the process. These are not flaws — they are the quiet signatures of an object built layer by layer, and part of what makes your Brézier entirely your own.
Everything you love about The Radial, just a little smaller. The same radiating petal face, the same silk PLA shell with its soft sheen and subdued glitter, the same little magnetic floral clasp that clicks shut so satisfyingly. It holds the essentials and not much else, which is rather the point: a card, a key, a lip balm, and you are out the door. Carry it on its own, or match it with the full-size Radial for a set you and your mini can share.
Product details
Measurements
A little smaller than The Radial Exact measurements coming soon
Materials
Silk PLA hard shell Lining: soft felt Gold hardware
Strap
Pearl strap with gold clasps, sized down
Features
Magnetic floral closure Radiating petal face, sized down 3D printed and made to order
Colors
Silky Rose, Silky Blue, Silky Bronze
The Mini & Me Set
Pair The Radial Mini with the full-size Radial and take $15 off. $240 for the set, normally $255.
One for you, one for your mini. Choose the set option at checkout on Etsy.
Made to Order
Each piece is made to order, printed just for you. Please allow 2–3 weeks for production before your piece is dispatched.
Like its full-size twin, The Radial Mini is crafted from silk PLA, a plant-based material made from renewable resources such as corn starch and sugarcane rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics, and biodegradable under industrial composting conditions. As with the full size, the silk is what gives the shell its sheen, a subdued glitter that shifts as you turn it.
Care Instructions
Wipe gently with a soft, dry cloth. Store somewhere cool and dry, out of long spells of direct sun. Because PLA softens in sustained heat, keep it out of hot cars.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your bag is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense for the piece.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
The Radial Mini is a small, hard-shell piece. It holds just the essentials and is not meant to flex or be overstuffed.
Each one is 3D printed and made to order, so small variations in texture, finish, or color are part of the process. They are not flaws. They are the quiet signatures of an object built layer by layer, and part of what makes your mini your own.
The Lattice, just a little smaller. The same open geometric pattern and the same clever little living hinge that lets rigid PLA flex and click shut. Big on charm, light on space, with just enough room for the little things. Wear it on its own, or pair it with the full-size Lattice so you and your mini can match.
Product details
Measurements
A little smaller than The Lattice Exact measurements coming soon
Materials
Silk PLA or plain PLA Lining: soft felt at the base Gold hardware
Strap
Pearl strap with gold clasps, sized down
Features
Mathematical living hinge, sized down Hidden magnetic clasp behind the logo 3D printed and made to order
Colors
Silky Pink, Silky Blue, Silky Bronze, Matte Sage
The Mini & Me Set
Pair The Lattice Mini with the full-size Lattice and take $15 off. $240 for the set, normally $255.
Both printed in the same color, in the same design, so the pair matches. See The Lattice Set →
Made to Order
Each piece is made to order, printed just for you. Please allow 2–3 weeks for production before your piece is dispatched.
Like its full-size twin, The Lattice Mini is crafted from silk PLA or plain PLA, a plant-based material made from renewable resources such as corn starch and sugarcane rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics, and biodegradable under industrial composting conditions. In silk, it carries the same gentle sheen and subdued glitter as its full-size twin.
Care Instructions
Wipe gently with a soft, dry cloth and store somewhere cool and dry. Let the little living hinge open and close on its own rather than forcing it, and keep the piece out of hot cars and long spells of direct sun.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your bag is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense for the piece.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
The Lattice Mini is a small, hard-shell piece. The living hinge is a feature of the lid, meant for gentle opening and closing.
Each one is 3D printed and made to order, so small variations in texture, finish, or color are part of the process. They are not flaws. They are the quiet signatures of an object built layer by layer, and part of what makes your mini your own.
The full-size Lattice and The Lattice Mini, printed in the same color and in the same design so the two actually match. Both carry the living hinge, a geometric lattice woven into rigid PLA so the lid sweeps open and closes over a magnet hidden behind my logo. One holds your day; the other holds a card, a key, and a lip balm. Bought together, the pair is $240 instead of $255.
Product details
In the set
The Lattice + The Lattice Mini Printed in one color for the pair
Measurements
The Lattice — Length: 8.5" (216 mm), Height: 5.25" (133 mm), Width: 4" (102 mm) The Lattice Mini — the same silhouette, sized down (exact measurements coming soon)
Materials
Silk PLA or plain PLA Lining: soft felt at the base Gold hardware
Strap
Pearl straps with gold clasps, each sized to its piece
Features
Mathematical living hinge on both pieces Hidden magnetic clasp behind the logo Four gold feet on the full size 3D printed and made to order
Colors
Silky Pink, Silky Blue, Silky Bronze, or Matte Sage
Price
$240 for the set — $15 off buying the two separately
Made to Order
Each piece is made to order, printed just for you. Please allow 2–3 weeks for production before your set is dispatched.
Both pieces are crafted from silk PLA or plain PLA, a plant-based material made from renewable resources such as corn starch and sugarcane rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics, and biodegradable under industrial composting conditions. In silk, both carry a gentle sheen, a subdued glitter that shifts as the light moves.
Care Instructions
Wipe gently with a soft, dry cloth and store somewhere cool and dry. Let each living hinge open and close on its own rather than forcing it, and keep both pieces out of hot cars and long spells of direct sun.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your set is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
Both pieces are hard-shell and structured. They do not flex or compress like a fabric bag, and they may produce a little more sound when set down. The living hinge is a feature of the lid, meant for gentle opening and closing.
Each one is 3D printed and made to order, so small variations in texture, finish, or color are part of the process. They are not flaws. They are the quiet signatures of an object built layer by layer, and part of what makes your set your own.
A smaller take on The Brézier. The same sculptural, wave-hemmed silhouette, now scaled down to adorably petite. Just enough room for the little things. Lovely on its own, or paired with the full-size Brézier for a matching mini-and-me duo.
Product details
Measurements
A little smaller than The Brézier Exact measurements coming soon
Materials
Silk PLA or plain PLA Lining: soft felt at the base Gold hardware
Strap
Pearl strap with gold clasps, sized down
Features
Open top, no closure Sculpted column with a waved base, sized down Four gold feet 3D printed and made to order
Colors
Matte Sage, Silky Rose, Silky Blue
The Mini & Me Set
Pair The Brézier Mini with the full-size Brézier and take $15 off. $190 for the set, normally $205.
Both printed in the same color, in the same design, so the pair matches. See The Brézier Set →
Made to Order
Each piece is made to order, printed just for you. Please allow 2–3 weeks for production before your piece is dispatched.
Like its full-size twin, The Brézier Mini is crafted from silk PLA or plain PLA, a plant-based material made from renewable resources such as corn starch and sugarcane rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics, and biodegradable under industrial composting conditions. In silk, it carries the same soft sheen and subdued glitter as the full-size Brézier.
Care Instructions
Wipe gently with a soft, dry cloth and store somewhere cool and dry, away from long spells of direct sun and heat. Because PLA softens in sustained heat, keep it out of hot cars.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your bag is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense for the piece.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
Each Brézier Mini is 3D printed and made to order, so small variations in texture, finish, or color are part of the process. They are not flaws. They are the quiet signatures of an object built layer by layer, and part of what makes your mini your own.
The full-size Brézier and The Brézier Mini, printed in the same color and in the same design so the two match. Both carry the same curve: wide, smooth radii through the base that draw upward and resolve into sharp inverted points at the top. Set side by side, the mini reads as the same drawing at a smaller scale, not a different bag.
Both stay open at the top — a closure would fight the drape. Both sit on four gold feet, are felt-lined at the base, and carry a pearl strap with gold clasps.
Product details
In the set
The Brézier + The Brézier Mini Printed in one color for the pair
Measurements
The Brézier — Length: 9.75" (248 mm), Height: 6.75" (171 mm), Width: 5" (127 mm), Weight: 1 lb (454 g) The Brézier Mini — the same silhouette and waved hem, sized down (exact measurements coming soon)
Materials
Silk PLA or plain PLA Lining: soft felt at the base Gold hardware
Strap
Pearl straps with gold clasps, each sized to its piece 15.7" (40 cm) on the full size
Features
Open top on both pieces, no closure Four gold feet under each piece 3D printed and made to order
Colors
Matte Sage or Silky Blue
Price
$190 for the set — $15 off buying the two separately
Made to Order
Each piece is made to order, printed just for you. Please allow 2–3 weeks for production before your set is dispatched.
Both pieces are crafted from silk PLA or plain PLA, a plant-based material made from renewable resources such as corn starch and sugarcane rather than petroleum. It is a thoughtful, lower-toxicity alternative to conventional plastics, and biodegradable under industrial composting conditions. In silk, both carry a soft sheen and a subdued glitter along the curve.
For flexible components across my collection I also use TPU, chosen for its durability and resistance to wear. A piece that lasts longer is a piece reprinted less often, and longevity is its own quiet form of sustainability.
Care Instructions
Wipe gently with a soft, dry cloth and store somewhere cool and dry, away from prolonged moisture and direct sunlight.
Because PLA is sensitive to sustained high heat, keep both pieces out of hot cars and long spells of direct sun. Handle them as you would any fine hard-shell accessory: with intention and care.
Shipping
Where I ship. United States only, for now. If you’re outside the US, email me and I’ll let you know when international opens up.
Cost. Free on every order.
Timing. Each bag is made to order, so there’s a production window before anything ships. Production: 2–3 weeks (10–15 business days). Transit: 1 week (5–7 business days). Most orders arrive 15–21 business days from the day you place them.
Once your set is finished and packed it ships from Michigan, and you’ll get tracking by email.
Delays. Printing is physical, and occasionally a piece doesn’t come out the way it should. If yours needs a reprint and there is a concern your shipment might be delayed a few days, I will email you.
Wrong address? Double-check your address at checkout. If you catch a mistake, email peachandpoppyhouse@gmail.com right away — I can usually fix it before the label prints.
Returns & Refunds
Every Peach & Poppy House bag is printed and assembled after you order it: in your color, on my machine, in Michigan. Nothing sits on a shelf waiting. Because each piece is made per person, all sales are final.
If something arrives damaged, defective, or isn’t what you ordered, email peachandpoppyhouse@gmail.com within 7 days of delivery with your order number and photos. I’ll repair, replace, or refund it — whichever makes the most sense.
Cancellations. Plans change. You can cancel for a full refund within 24 hours of ordering. After that, the material is committed and the print is underway.
Questions before you buy? Email peachandpoppyhouse@gmail.com. My goal is to be as transparent about the process and product as possible. If you are happy, then I am happy.
A note on the nature of this piece
Both pieces are hard-shell and structured. They do not flex, compress, or overstuff like a fabric bag, and they may produce a little more sound when set down or handled. This is a natural quality of their rigid construction.
Each one is 3D printed and made to order, so small variations in layer texture, finish, or color are part of the process. They are not flaws. They are the quiet signatures of an object built layer by layer, and part of what makes your set your own.
